• XGLO™ Multimode Fiber Optic Cable - International

  • Mã sản phẩm : MS 399
    Giá : Liên hệ
    Nhóm sản phẩm :
    Lượt xem : 540 lượt

Giới thiệu sản phẩm

Specifications

Siemon’s XGLO 50 micron laser-optimized optical fibre cable is perfectly suited for the support of the 10GBASE-SX application at all horizontal work stations, riser, and short length backbone (< 300 m) locations. XGLO multimode cables are constructed from optical fibres that are characterized for overfilled launch (OFL) and restricted mode launch (RML) bandwidth to ensure full compatibility with both LED and laser light sources. Siemon’s optical fibres exhibit virtually zero differential mode delay (DMD) at the core so that mode conditioning launch cords are not required to support VCSEL applications such as Gigabit and 10 Gigabit Ethernet.

Highlights

  • 900µm tight buffer
  • 250µm coated optical fibre
  • Length markings in 2 ft. increments
  • Available in OFNR, OFNP and LS0H constructions
  • Jacket material is lead free
  • RoHS Compliant

PACKAGING

  • Reels

Standards Compliance

  • ISO/IEC 11801:2002 OM3
  • ANSI/TIA/EIA-568-B.3
  • ANSI/TIA/EIA-568-B.3-1
  • ANSI/TIA-598-C
  • Telcordia GR-409-CORE
  • LSOH: IEC 60332-1, IEC 61034, IEC 60754
  • OFNR: Communications Type OFNR (UL) and CSA FT4 c(UL)
  • TIA-492AAAC laser bandwidth DMD specification
  • IEC 60793-2-49 and TIA/EIA 455-220 DMD measurement test procedures

Part Numbers

9F5LB(X)-12D(XXXX) fibre count = 12, construction = 1 tube of 12 fibres
9F5LB(X)-24B(XXXX) fibre count = 24, construction = 4 tubes of 6 fibres
9F5LB(X)-48D(XXXX) fibre count = 48, construction = 4 tubes of 12 fibres
9F5LB(X)-4A(XXXX) fibre count = 4, construction = 1 tube of 4 fibres
9F5LB(X)-6B(XXXX) fibre count = 6, construction = 1 tube of 6 fibres
9F5LB(X)-72D(XXXX) fibre count = 72, construction = 6 tubes of 12 fibres
9F5LB(X)-96D(XXXX) fibre count = 96, construction = 8 tubes of 12 fibres

Use (X) to specify cable rating: 1 = OFNR, 2 = OFNP, 3 = LS0H
Use (XXXX) to specify length in kilometre, use four characters including decimal point. The last “X” must be a zero (0) or five (5) only.
Example P/N: 9F8LB1-12D1.50: (1.5 kilometres [1500 metres] of 12-strand riser rated fibre optic cable) For orders of less than 1 km, the first “X” must be zero (0).
Example: 9F8LB1-12D0.55 (.550 kilometres [550 metres] of 12-strand riser rated fibre optic cable)
Cable designs and specifications are subject to change without notice.